| Size | Rough Opening Size | Light Surface (W x H)x2 | Light Surface (S.F.) | Vent Surface (W x H) | Vent Surface (S.F.) |
|---|---|---|---|---|---|
| 32X15 | 32 3/8" x 15 7/8" | 12 7/8" x 11 5/8" | 2.08 | 12 5/16" x 11 1/16" | .95 |
| 32X19 | 32 3/8" x 19 7/8" | 12 7/8" x 15 5/8" | 2.79 | 12 5/16" x 15 1/16" | 1.29 |
To provide a thermal barrier against all climate conditions, the movable sash and the meeting rail are equipped with strips of fin seal weather stripping. The top and bottom sash rails and the interlocking edge of the meeting rail utilize a .200” high pile inserted on each style member. Virtually all potential draft points have been eliminated.
glazing
We are pleased to provide our customers with the highest quality glazing on the market today. The main frame is glazed with a continuous bead of high quality silicone adhesive, which is applied by robots for accuracy and consistency.
Main Frame
Weather Stripping
The sliding sash is constructed of rigid PVC hollow extrusion with a wall thickness ranging from .075” on the pull handle to .050” o n the interior walls. The sash is screwed by hand on all four corners to insure a rigid and accurate sash that matches perfectly with the frame construction and allows finger tip control for opening and closing the sash which provides years of trouble free performance. Integral interlocking webbing on the sash and meeting rail insure a positive interlock in the center of the window further enhancing security and thermal performance.
The fixed meeting rail is constructed of rigid PVC hollow extrusion with a wall thickness ranging from .060” on the exterior walls and .050” on the interior walls. The rail is attached to the main frame with four 2-1/2” long anti-corrosive stainless steel screws. It also contains an integral channel with a built in catch slot which receives the lock sweep mechanism enhancing security and thermal protection.
Sill Riser
+1-816-690-3400
201 N Spruce, Bates City, MO. 64011 USA
Fixed Meeting Rail
Constructed of rigid PVC extrusion with a wall thickness of .060”, the sill riser provides the basis for our aesthetically pleasing, equal light, glass panel design between the fixed and the sliding sash. The design utilizes a solid, snap fit leg construction to avoid shipping damage or loss. This design also allows for unobstructed drainage clearance under the sash panel.
The main frame is constructed of rigid PVC hollow extrusion with a wall thickness ranging from .060” on the exterior walls to .050” on the interior walls. It provides an excellent thermal barrier against all types of climate conditions. Our high tech, four head welding line provides an all welded construction. This allows the product sizing accuracy, quality and it guarantees a leak proof corner. Our unique heavy-duty dual wall exterior flange provides an aesthetically appealing exterior installed appearance.